ServiceM8 Form.
Schedule of Test Results – SA
Are you an Electrician in SA? Need to complete the SA Government’s testing and verification form from the Office of the Technical Regulator (OTR)?
Note: This form is valid as at 01 Jan 2023. In South Australia, submitting the results of examination and testing to the OTR will soon become mandatory. These will need to be submitted with every Electrical Certificate of Compliance (eCoC) from mid-late 2023.
THE PURPOSE.
This complex form is made easy through Simplifi’s ServiceM8 form template.
The form covers all aspects of the requirements to help you ensure that mandatory testing is carried out in accordance with AS/NZS 3000.
WHAT IS COVERED.
Preset with responses to select from – or add in your own. It captures all information regarding:
- Job details
- Switchboard details
- Test equipment (Type, Serial No and Calibration Date of up to 4)
- Main switchboard, consumers mains & main earth
- E.N Connection & Main switchboard earthing compliant
- Main Switch / Load Limiter
- Conductor
- Earth Continuity (ohms)
- Insulation Resistance (Megohms)
- Polarity CCT CXNe
- Comments
- Submains (up to 5)
- Circuit ID & No of phases
- Over Current Protective Device
- Conductor
- Earth Continuity (ohms)
- Insulation Resistance (Megohms)
- Polarity
- CCT CXNe
- Earth fault loop impedance ?
- RCD test results
- Final sub circuits (up to 7)
- Circuit ID & No of phases
- Over Current Protective Device
- Conductor
- Earth Continuity (ohms)
- Insulation Resistance (Megohms)
- Polarity
- CCT CXNe
- Earth fault loop impedance ?
- RCD test results
THE COST.
$249
Simplifi also has another Testing and Verification form is also available – Electrical Visual Inspection and Verification form from the SA Government OTR.
Changes can be made to your form if you require alternative pre-set options. Please contact Simplifi to talk about this further.
